These standoffs will come with your motherboard, and as soon as you’ve situated them, you can start screwing them into your case. There should be a few dozen holes for the standoffs to suit into. Refer to your case’s handbook if you’re having bother discovering them. Once the standoffs are screwed in, you are able to insert your motherboard.
Then, place the cooler on the CPU — the pressure will spread the thermal paste adequately. For actual installation directions, we recommend you consult the guide that got here with your CPU cooler. When it is fully seated, it’ll stand off the motherboard a few 35-degree angle. Push the SSD down and exchange the tiny screw to lock it in place. Non-modular PSUs have all cables completely attached.