You ought to apply a paper-thin layer of paste spread evenly on prime of the CPU. From there, screw in the remaining screws to safe your cooler on prime of the processor. You will need to orient the gadget with the SATA connectors going through the again panel as that is where you want your cables to run. Once aligned, screw into place and slide the tray back into the drive bay. In some instances, the drives use the identical screws as the motherboard however all the time seek the advice of the case handbook.
Make certain to shut down your check bench, unplug the wires, and set your GPU apart for now, however you possibly can leave your CPU, cooler, and RAM on the motherboard to make set up slightly quicker in a while. [newline]Make sure your motherboard doesn’t require a BIOS replace to assist newer CPUs. The 110R Tempered Glass Mid-Tower ATV Case is no exception. It offers ample space and compatible screw profiles for our chosen motherboard, while also including a glass door to show off the internals’ designs.